Engine Analysis Form - RPM Rubber Parts

Data Required for Engine Analysis

Engine CAD Upload:

Drop files here or

Max. file size: 50 MB.

1. Engine Model & Manufacturer:(Required)

2. Transmission Model & Manufacturer:(Required)

3. Engine Weight (Wet, Including Accessories):(Required)

We =

4. Transmission Weight (Wet):(Required)

Wt =

5. Engine C.G. Height Above CSCL:(Required)

He =

6. Transmission C.G. Height Above/Below CSCL:(Required)

Hf =

7. Front Mount Location Above/Below CSCL:(Required)

Hf =

8. Rear Mount Location ABove/Below CSCL:(Required)

Hr =

9. Engine C.G. Location Behind Front Mount(Required)

Le =

10. Rear Face of Block Behind Front Mount:(Required)

Lb =

11. Rear Mount Location Behind Front Mount:(Required)

Lr =

12. Transmission C.G. Location:(Required)

Lt =

13. Rear Mounting Spread:(Required)

Sr =

14. Front Mounting Spread (Zero for Single Front Mount):(Required)

Sf =

15. Engine Speed:

Idle Speed:(Required)

NI =

Operating Speed:(Required)

NO =

16. Number of Cylinders and Arrangement (I-6, 90° V-8, etc.):(Required)

17. Two or Four Stroke:(Required)

Two Stroke

Four Stroke

18. Tail Support Location Behind Front Mount (If Applicable):(Required)

LS =

*19. Moments of Interia of Total System or for all Components (Engine, Transmission, etc.)(Required)

Ixx = ; Iyy = ; Izz =

(If these are not available, a drawing of the engine / transmission system is required, outline dimensions required.)

Drop files here or

Max. file size: 50 MB.

20. Output Torque (Including Highest Gear Mulitplication):(Required)

TO =

21. Firing Sequence:(Required)

22. Crankshaft Arrangement (# of Throws, Staggered Throw, etc.):(Required)

23. Application:(Required)

On-highway

Off-highway

Sever duty (provide details of application)

* A tail support mount is necessary if static bending moment on rear face of block (RFOB) is greater than the manufacturer’s rating.

Additional File Upload:

Drop files here or

Max. file size: 50 MB.

First name(Required)

Last name:(Required)

Email:(Required)

Phone:

Comments

This field is for validation purposes and should be left unchanged.