RPM Rubber Parts Blog

A Comprehensive Guide for OEMs on Identifying and Correcting Engine Mount Failure in Industrial Vehicles

Written by RPM Rubber Parts | Oct 12, 2023 12:00:00 PM

The integrity and performance of industrial vehicles depend significantly on components often deemed ‘minor’ but whose failure can lead to significant operational shortcomings. Among these are engine mounts—the silent workhorses that absorb engine vibrations, minimize noise, and contribute to overall vehicle stability.

For Original Equipment Manufacturers (OEMs), understanding how to identify and rectify engine mount failure is critical, especially when other components are swapped out or upgraded, necessitating a potential mount redesign.

 

Identifying Engine Mount Failure: Telltale Signs

Before diving into corrective measures and redesign strategies, it's imperative to recognize the signs of engine mount failure. Here are some crucial indicators:

  • Increased Vibrations: Engine mounts are essentially vibration dampeners. If you’re receiving many calls or quality requests advising of noticing an unusual increase in vibrations, especially in the cabin or through the steering system, there's a high likelihood that an engine mount has failed or is on the verge of failing.

  • Audible Noises: Knocking, rattling, or clunking noises originating near the engine are often symptomatic of a failing engine mount. These noises occur due to the engine shifting and coming into contact with other components or the vehicle frame.

  • Misalignment: A visually skewed engine or transmission can indicate that amount isn’t performing its role of maintaining alignment.

  • Performance Drop: Failing engine mounts can drastically affect a vehicle's balance and handling. This often manifests as poor steering responsiveness, reduced acceleration, and increased fuel consumption.

Correcting Engine Mount Failure: Initial Steps

Identifying the symptoms of engine mount failure is just the first step; the crux lies in swift and effective corrective actions. Here's how to proceed:

Immediate Inspection Begin with a thorough visual and tactile inspection of the engine mounts. Check for signs of wear and tear, such as cracking, distortion, or separation in the rubber and corrosion or structural damage in the metal components. Some failures are visibly evident, providing a quick diagnosis.

Diagnostic Testing While a physical inspection can reveal obvious issues, more covert failures might require advanced diagnostic methods. For instance, vibration analysis tests can detect subtle inconsistencies that might be missed otherwise. Material testing for the rubber components can also provide insights into the degradation level, indicating whether a replacement is imminent.

Component Replacement Once a faulty engine mount is identified, the most straightforward and effective corrective action is to replace it. Trying to repair a failing engine mount is rarely advisable as it compromises the safety and performance of the industrial vehicle.

Post-Installation Checks After replacement, always conduct a series of tests to confirm that the new mounts are functioning as intended. Check for vibrations, noises, and any signs of misalignment. These post-installation checks ensure the issue has been successfully addressed, restoring the vehicle's performance and safety parameters.

By taking these steps, you address the immediate issue and lay the groundwork for preventive measures, thereby avoiding potential future failures.

 

Redesigning Engine Mounts: The Need for a New Approach

When components like engines, transmissions, or exhaust systems are swapped out or upgraded, the existing engine mounts may no longer suffice. They may not be rated for the new weight, vibrations, or thermal conditions, necessitating a redesign.

  • Weight Considerations: Any increase in component weight can subject the existing engine mounts to additional stress. A redesigned engine mount must be more robust, incorporating metal supports or denser rubber.

  • Vibrational Load: New components have different vibrational characteristics. OEMs should conduct vibrational analysis tests to understand how these changes impact the existing engine mounts and what modifications are required.

  • Thermal Changes: Upgraded engines may run hotter or colder than their predecessors. This can affect the longevity and effectiveness of the engine mounts unless they are redesigned to accommodate these thermal changes.

Strategies for Effective Redesign

  • Computational Analysis: Use Finite Element Analysis (FEA) and other computational tools to simulate the redesigned engine mounts' stresses, vibrations, and thermal loads. This aids in optimizing the design for both performance and longevity.

  • Material Selection: When redesigning, take the opportunity to explore new materials that offer improved characteristics like heat resistance, strength, and vibration dampening. At RPM Rubber Parts, we specialize in advanced rubber compounds designed for high-stress applications, making them ideal for new engine mount designs.

  • Prototyping: Always remember the value of creating prototypes. These can be subjected to real-world tests to validate computational findings. It's far easier to identify weaknesses or areas for improvement on a prototype than after initiating mass production.

  • Collaboration: Involving engineers, material scientists, and operational testers in the redesign process is crucial. Their collective insights can contribute to a more effective and durable engine mount design.

 

Best Practices: OEM Guidelines for Redesign

 

If you identify that a redesign or refitting of an engine mount is required for your equipment, here are some common but critical things to consider and implement to ensure that your new components are correctly adhered to, reducing future failures in the field.

  1. User Manuals: Update user manuals to include information about the new engine mount design, especially any new maintenance or inspection protocols.

  2. Training: Conduct training sessions for service engineers and maintenance staff to familiarize them with the new design and its features.

  3. Quality Control: Implement rigorous QC checks specifically for the redesigned engine mounts, ensuring they meet all performance and safety metrics.

  4. Feedback Loop: Create a system for gathering feedback from end-users and field service engineers. This information can be invaluable for ongoing improvements.

  5. Documentation: Maintain comprehensive records of the redesign process, including computational analyses, material selection decisions, and test results. This will be invaluable for future redesigns or troubleshooting.

 

Engine mount failures in industrial vehicles are not just a maintenance issue but can signal a design flaw or the need for redesign, significantly when other components are changed. By understanding how to identify these failures and implement a comprehensive redesign strategy, OEMs can dramatically improve the performance, safety, and reliability of industrial vehicles.

For cutting-edge materials and expert consultation on engine mount designs, trust RPM Rubber Parts. We have decades of experience in engineering high-quality rubber components for industrial applications. Contact our experts today for customized solutions tailored to your specific needs.